skip to Main Content

The Wait is Over

Adding SmartFlowX to NAPA TRACS Enterprise turns your operation into a digital shop. Not only are ARO increases the inevitable results, but the Retention rate will also increase as well. Best of all: you can measure staff behavior to pinpoint exactly what changes need to be implemented to reach your goals.

AutoVitals NAPA TRACS Enterprise Integration.

20% ARO increase with 100% guarantee, too good to be true?

ARO and Retention Rate will increase inevitably.

The use of SmartFlowX and NAPA TRACS Enterprise establishes a consistent Digital Standard Operation Procedure, which results in ARO and Retention rate increases of at least 20% each.

Below is an example of how a shop increased ARO by 33% and their weekly revenue by 59%.

Graph demonstrating ARO and weekly revenue increase.
Inspection results pushed to work order.

Inspection Results pushed to Work Order

Canned Jobs are key to pushing the Inspection Results to the WO. Make sure they are defined on your Inspection Sheet.

AUTO REPAIR SERVICES

Techs’ Recs become Jobs on the WO

The WO is auto-populated with all tech findings and techs are assigned to the Work Order in NAPA TRACS. On button press. Simple.

AUTO REPAIR SERVICES

Recs are added to Reminders

Do you have impactful pics showing the problem area the recommendation will fix? Recs mapped to Inspections are added to the reminder.

AUTO REPAIR SERVICES

Techs Document Work Completion on Tablet

Service Advisors use the Today’s Vehicles Page to watch updates on the techs’ progress so they can start new work faster.

AUTO REPAIR SERVICES

Open/Close WOs in SmartFlow. Simple.

Instead of walking back and forth between a PC and the vehicle, techs just use the tablet. We update automatically.

AUTO REPAIR SERVICES

TeE-Times works like a breeze

Techs mark work, lunch, training, and other unbilled hours on the tablet. The TeE-Time report documents Tech Productivity, Efficiency, and Proficiency.

Inspection results pushed to work order.

Inspections are Pushed to the Work Order

Press a button on the TVP and the Inspection Results appear on the Work Order

Press the “WO Update” button or “VIN, Odo -> WO” and the work order will be updated. That includes the tech assigned to the jobs on the TVP.

update-work-order-in-napa-tracs

Note that pressing the update button the first time will test whether the connected NAPA TRACS version supports the software interface between both tools. The message marked with (1) below will appear. Once you press the update button again after 2 minutes, either the data exchange is successful or message (2) appears.

if-NAPA-TRACS-is-not-compatible

AUTO REPAIR SERVICES

Techs’ Recs Appear on the Work Order

All Canned Jobs are imported to SmartFlow and can be added as a recommended action. Once tapped by the tech they appear on the Work Order.

  1. The complete description of the operation appears
  2. Additional Information about why the canned job has been recommended is added as well

AUTO REPAIR SERVICES

Techs Document Work Completion

A simple tap on the work order indicates what job has been finished.

It allows the SA to decide about new vehicles to be dispatched to the tech.

tech-completion

AUTO REPAIR SERVICES

Inspection Results for Declined Work shine on the Service Reminder

The automated detection of Declined work on the Inspections Results leverages images and educational Information in the Reminder

All you need to do is configure the canned job as recommended action on the inspection sheet. SmartFlowX does the rest.

In addition, Checklist items will be added, as well as ‘future attention’ items from the inspection results.

If the Checklist items have a different due date than the next service reminder, an additional reminder will be sent out (e.g., “Replace Brake Pads” in 60 days).

Last but not least the Campaign Manager can be configured to send campaigns to all overdue services, e.g., every 4 weeks all customers with an overdue BG Transmission service get emailed and/or texted.

reminder
AUTO REPAIR SERVICES

TeE-Times work like a Breeze

Techs use TeE-Times configured in AutoVitals on the tablet to indicate non-billable hours.

The payroll can be based On TeE-Times, without the techs needing to clock in on a PC.

tee times

Didn’t find what you were looking for?

Back To Top